There is no sewer system in rural areas, and the dirty water in the bathroom, washing clothes, and b

It's good to make your own septic well, you can search for the septic well drawings and you can search for the drawings. There are also finished septic wells that can be used, just find a seller and ask how to install them. It's good to pay attention to the depth of the burial, if it weren't for the fact that there is no problem of soil thawing in the north, as long as it is buried lower than the ground, if there is a possibility of freezing, it would be good to bury it below 1.5 meters, but I really don't remember what the norm is.

You can also look it up for yourself. It's okay to buy the finished product and ask the seller. If you do it yourself, in fact, it is enough to connect several wells in a row at different heights.

The first well to the last well connected by the sewage is higher than the other, and three to four wells are enough.

If you don't have a blueprint, you can make your own septic tank, a larger one is better, and the water from the septic tank is drained into the sewage ditch.

I'm going to make a bathroom in the basement, so that if you need to use the toilet, you don't have to run back and forth. But the developer did not leave a water pipe, how to solve this?

Fortunately, the master later told me, don't blame the developer for not leaving a water pipe in the basement! The toilet is equipped with a lift pump, which is so good that it can't be used.

What is a Sewage Lift Pump?

This is a kind of lifter, which can completely solve the problem of sewage discharge when there is no drainage pipe in the basement. When the toilet sewage flows into the lifting pump, the machine will automatically start, the water level rises, and the internal reamer will crush the dirt and then discharge it from the sewage outlet.

Easy to install and odorless.

It can be installed directly on the back of the toilet, against the wall, which does not take up space and is more conducive to drainage. As for the odor, after all, the ventilation of the basement is not very good, so there will basically be an activated carbon filter, so that the odor can be absorbed without worry.

Easy to access. If there is a relatively large solid falling into the water tank, the lifting pump also comes with a check cover, and it can be opened and cleaned directly, which is very convenient.

Not afraid of clogging. Speaking of which, surely some people will say that the basement toilet will not be clogged with a lift pump? As mentioned earlier, the lifting pump is a built-in reamer, for useless waste, it will be directly crushed, and then discharged, such a design, as long as it is not deliberately damaged, basically there will be no clogging problem.

What do I need to pay attention to when installing?

The distance between the lifting pump and the toilet bowl should not be longer than 30cm, otherwise the slope is not enough, and the sewage cannot flow smoothly into the equipment;

When choosing a lifting pump, the sewage discharge capacity must be strong. In addition, the upper discharge height of the sewage lifting pump is limited, up to 7 meters, and the sewage discharge capacity is limited;

There is a certain amount of noise when the machine is running, but in the basement, it doesn't matter.