-
Anonymous users2024-01-24Either the door was dismantled and reinstalled, or the floor was warped and backfilled! Height control in the process of floor heating backfill is the most critical, it is difficult to control the flatness with traditional cement mortar leveling, at present, many people use co-creation fast leveling instead of traditional cement mortar leveling, which is more cost-effective!
Co-creation fast leveling is a new material for ground rapid leveling developed by the co-creation technical team for several years, which is composed of Air520 Y (transparent blue liquid) and anti-crack protective agent (transparent colorless liquid); Green environmental protection products with sound insulation, waterproof, and mirror effects replace traditional ordinary cement mortar leveling, and meet the requirements of flatness that can be thinly pasted with tiles and wooden floors. Its main advantages are as follows:
1) Sound insulation and heat insulation: the thermal conductivity of fast leveling materials is used, and the weighted standardized impact sound pressure level (on-site measurement) is less than 75dB, which meets the requirements of GB50118-2010 "Code for Sound Insulation Design of Civil Buildings".
2) Light and environmentally friendly: the dry density of fast leveling is 450 700kg m3, which is about 1 3 of ordinary cement mortar; Taking a 30-storey residential building with a construction area of 1,000 square meters per floor as an example, laying 4cm thick quick leveling increases the weight of the whole building by 2,400 tons, while the use of cement mortar leveling requires 8,600 tons, and the weight of the whole building is reduced by 6,200 tons.
3) Mechanized construction: It integrates the functions of intelligent water metering, automatic mixing and mechanized pumping, and the whole construction process is fully mechanized, with a flatness of 2-3mm 2m, which can directly pave wooden floors and tiles.
4) Flatness: Its flatness can reach 2mm 3m, and the surface does not need to be self-leveling to be ordinary wood flooring.
5) Economy: A construction of 5cm, can have both thermal insulation and sound insulation effect, no need to add additional thermal insulation system and sound insulation system, reduce the overall cost.
6) Integrity: Co-creation fast leveling and the base layer are firmly bonded, no hollowing, no cracking.
7) Zero impact on the environment; Taking Changsha as an example, in 2018, the sales area of commercial housing in six districts of Changsha City was about 22 million square meters, and if traditional leveling was adopted, 1.76 million tons of sand were needed for construction (calculated by 4cm leveling, each square meter needs to use tons of sand). The use of fast leveling construction does not use sand, which has zero impact on the ecological environment.
Hello, according to Hermans' many years of experience in the installation of carbon nanotube floor heating: solid wood flooring is natural wood and easy to deform; The hardness of laminate flooring is stronger than that of solid wood flooring, and it is reconstituted by resin, which is not easy to deform. Solid wood flooring is deformed due to its own humidity, and laminate flooring is superior to solid wood flooring. >>>More
For the room with floor heating, the bathroom is a very special place, one is that the heating cable or hot water coil for floor heating is less laid, and the second is that the heat requirement is larger than that of other places, and it is also a large space for heat dissipation. The contradiction between high heat load index and insufficient heat supply of floor heating is more prominent. This is also an important reason why many of our water and floor heating sites also lay electric floor heating, and even water floor heating and electric floor heating are laid at the same time. >>>More
Yes, Shangchen floor heating solid wood flooring is selected from more than 100 years of cherished tree species, to ensure that each floor can achieve 5,000 consecutive hours to withstand the baking limit test of more than 60 degrees of flooring.
1. Industry insiders said that under normal circumstances, the geothermal room can be paved with solid wood flooring, but it is not recommended to use it in this way, and it is best to pave laminate flooring and solid wood parquet instead. Because of the beautiful color and comfortable feel of hardwood flooring, many families use it as the first choice for bedroom floor covering. >>>More
Basically, the switches are against the wall, and they can be wrapped in cabinets without tiles.