-
It should be because the transparent primer is not dry, you will polish, and it is easy for white spots to appear in the next construction if the primer does not dry.
The planks are relatively white and flat.
Such small places will appear. >>>More
Don't, sanding is before spraying the primer, sanding uneven places, defective putty.
1 All 1There is water in the paint, (probably in the air pump). >>>More
Is it sanded with sand pe? After spraying, it has to be sanded with sand skin, and it is not polished until the last time. In addition, after the topcoat is diluted with thinner, it is filtered through a strainer and left for a few minutes before spraying.
The orange peel phenomenon of paint is actually caused by the dry spraying phenomenon of paint, the main reason is that the viscosity of the paint is large, and the supporting special thinner can be appropriately added; In addition, the pressure of the spray gun is appropriately lowered; The distance between the nozzle and the surface to be sprayed is approximate. >>>More