-
Anonymous users2024-01-24You can remove the hot water faucet from the small bathroom, the cold water can go up, and then turn on the hot water switch, if there is a problem, it means that the water pipe is blocked, if there is no problem, it is a problem with the faucet.
-
Anonymous users2024-01-23Take the faucet out and see if there is any water, if there is a faucet problem, if there is a water pipe problem.
-
Anonymous users2024-01-221. The hot plastic pipe is used, and the temperature is too high to block the pipe during the construction of the joint.
2. The pipeline is wrong and not connected.
3. Not enough pressure.
-
Anonymous users2024-01-21The hot water pipe water valve pipe is up. or not connected to the hot water pipe.
-
Anonymous users2024-01-20Look for a plumber installer at the time.
This has nothing to do with the water heater itself, it is completely a control circuit or a waterway that works. >>>More
Whether to install two water heaters or one in a house, and which type to install, depends on the location used in the room and the allowable installation conditions. >>>More
Judging from the phenomenon described, most of them are due to the wrong water line connection or the hot water line between the other bathroom and the water heater is dirty, blocked, broken or connected to the wrong pipe. >>>More
Storage type electric water heater?
In the process of putting hot water in the previous toilet and reaching 60 degrees, a certain amount of tap water enters the water heater, and the tap water entering the water heater is mixed with the hot water in the water heater for cooling, and when the hot water is turned on in the other bathroom, the tap water continues to enter the mixing to cool down, resulting in a drop in water temperature. >>>More
One is the problem of water heater capacity, and the other is the problem of water pressure.