Kitchen drain cast iron pipes, half a centimeter from the roof of the shed cracks, almost completely

Updated on Kitchen 2024-09-10
3 answers
  1. Anonymous users2024-01-24

    Use quick-drying waterproof glue or plugging king, first clean the fracture of the iron pipe, and the rust should also be cleaned off, and then apply it, and the effect is better if you apply it several times.

  2. Anonymous users2024-01-23

    Temporary solution: find a thicker, more elastic piece of rubber, about 5 cm wide, the length is just equal to the outer diameter of the cast iron pipe, enclose the crack, and find a suitable hoop outside to tighten it. Or tie two wires with about 10 wires at the upper and lower ends of the rubber pad to solve the water leakage.

  3. Anonymous users2024-01-22

    Find a welder to weld it.

Related questions
What's going on with the white powder in the bathroom sewer cast iron pipe
1 answers2024-09-10

The tubes are oxidized, and the pipes used to be cast iron pipes, so it is recommended to replace them in time.

How to connect the kitchen sewer main through the carport, after the cast iron pipe is sawn?
4 answers2024-09-10

What is sawn can only be welded.

This activity is not technically complicated, but it does require a full set of gas welding equipment, and you can only find drainage professionals, and some property companies also have similar equipment. How to deal with it depends on the local situation. >>>More

What should I do if the cast iron pipe in the kitchen is cracked? How can I repair it to ensure that
3 answers2024-09-10

The best way, water glass mixed with cement paste, method; Go to the building materials store to buy a bottle of water glass 2 catties of cement, clean up the rust stolen goods around the surface of the cast iron pipe, replace rubber gloves, because your crack is larger, first mix the cement with water to level the big crack, press it and pour it into half a catty of cement and quickly stir it into a semi-flowing shape and immediately apply it to the crack, the thickness is about 3mm, the area is not the farthest crack is 20mm long, and then mix half a catty and coat a layer, expand the area some, the thickness reaches 10mm, and the surface treatment is smooth. Be careful not to allow the cement to flow into the pipe. After 15 minutes, the water will be normal. It is no problem to keep it for 7-10 years.

The toilet sewer pipe (cast iron pipe) has more than one leakage, and the pipe should not be replace
7 answers2024-09-10

LZ's problem is the same as what happened to me, and it's very annoying. At that time, the upstairs was dripping non-stop, and I had to use an umbrella every time I went to the bathroom. Disgusting to death quickly! >>>More

Kitchen drain cast iron pipes, part of the area trachoma, sawed off the trachoma part, replaced with
1 answers2024-09-10

I'm afraid not, how to connect PVC and cast iron pipes, or replace them with PVC