Frame structure, low rise dwelling. Want to tear down an entire wall one of the living room and bed

Updated on Living room 2024-09-19
2 answers
  1. Anonymous users2024-01-24

    If you want to knock down the load-bearing wall, you need professional skills, such as pumping the wall and replacing the beam, pulling out the column of the joist, changing the beam and reinforcing the beam, etc., and you can't knock it off casually. If it is transformed into a dilapidated house without permission, the gains outweigh the losses. You can contact the construction team with professional skills in this area.

  2. Anonymous users2024-01-23

    No, that's because the main body is load-bearing.

Related questions
3 answers2024-09-19

1.The elevation of the balcony floor should be 60mm lower than that of the bedroom floor; >>>More

4 answers2024-09-19

Residential, the floor height is 3m 3m2, so that the net height after deducting the building and structure can be more than 2m7, and it is not suitable to be as low as 2m5. >>>More

1 answers2024-09-19

12 walls, (width 12 cm) non-load-bearing walls, can be knocked.

2 answers2024-09-19

Depending on what form your balcony is, if there is a beam under the balcony, you should divide the load of the balcony to the beam! If there is no beam, the load must be converted! See if it's going to be converted to torque or something. The main thing is to look at the form of the structure!

4 answers2024-09-19

Rural houses are not frame structures, they are brickwork. A hollow living room with a height of 6 meters is safe. However, it is necessary to ensure that the strength grade of the masonry is not less than and the strength of the mortar is not less than. Structural columns are set at corners and ends, and ring beams are set up on each floor.