-
Anonymous users2024-01-24Can be installed.
The first is the combination of radiant heating on the ground and radiant heating on the wall. In this way, the heating and heat dissipation area of the toilet can be increased, the heat dissipation capacity of the toilet can be increased, the average temperature of the wall surface can be increased while reducing the average temperature of the ground, the average radiation temperature of the toilet can be increased, and the heating comfort of the toilet can be improved.
The second is the combination of underfloor heating and radiator heating. The water temperature is the same as that of underfloor heating, and a separate circuit is provided to the toilet from the manifold.
Third, you can also use a water mixing device to provide heating water supply to the room at different temperatures. The toilet uses a higher temperature of the primary system hot water (water supply temperature "60"), which is heated by radiators, and the other rooms are heated by low temperature (secondary system water supply temperature < 60) floor radiant heating. A separate cryogenic water circulating pump needs to be added to the user side.
Due to the use of higher water supply temperatures, the size and size of the heating system network are reduced.
It is better to make a false wall, but also pay attention to the problem of future repair, and the bathroom is a load-bearing wall, which cannot be knocked.
Yes, the seal is very good, and it will not leak air or rain.
Yes, no taboos. As long as the smoke exhaust duct is naturally unblocked, it is OK.
Can a toilet with a 300 pit spacing be installed with a 400 pit spacing? >>>More
Yes, I make doors and windows, and we often have meters of sliding doors. >>>More