What is a good way to clean the heat transfer paper of the anti theft door?

Updated on Security door 2024-09-11
5 answers
  1. Anonymous users2024-01-24

    It's already sticky, so there's no good way to do it, so you can only soak it in water and brush it with a brush and re-polish it.

    It is recommended to add release materials such as silicone oil to the glue.

  2. Anonymous users2024-01-23

    Blow it hot with an electric hair dryer and slowly remove it. Or with banana water.

  3. Anonymous users2024-01-22

    Don't wash it with petrol, try it with diesel or engine oil.

  4. Anonymous users2024-01-21

    Heating up is fine.

  5. Anonymous users2024-01-20

    Add alkali with warm water and you're good to go.

Related questions
2 answers2024-09-11

The white color of the security door should not be transferred, but the white pearlescent spray paint is.

2 answers2024-09-11

The door frame is hit into the wall with expansion bolts, and the edges are fixed with fine stone mortar.

2 answers2024-09-11

Add some oil, or re-equip a key.

7 answers2024-09-11

The anti-theft door key is very difficult to open the door, you can apply some sesame oil on the key, the specific operation steps are as follows: >>>More

8 answers2024-09-11

Here are three ways to get rid of it.

1. Edible oil elimination method: first use edible oil to smear the area with self-adhesive, do not need too much, apply it, and it is best to pad a newspaper on the ground, because the oil droplets are easy to drip on the ground. After more than ten minutes, take a small bamboo clip for drying clothes, you can easily shovel off the sticker, and then dry it with a paper towel, if there is still a small amount that has not been removed, do it again, and finally wash the residual oil on the door with a towel dipped in soapy water, and the door will be as clean as new. >>>More