-
Anonymous users2024-01-24The left and right adjustment of the cabinet door of panel furniture needs to adjust the hinge, and the hinged hinge can adjust the screws on the hinge.
The butterfly hinge needs to be re-drilled and installed. Turn left|Turn the butterfly hinge to the right and turn left to |The common classification of right-turning hinges is divided into two types: detachable type and fixed type according to the type of base, and is divided into two types according to the type of arm body: slide-in type and card type;
In addition, according to the position of the door panel covering, it is divided into a full cover (straight bend, straight arm) general cover 18 centi, half cover (middle bend, curved arm) cover 9 centi, and the built-in (big bend, big curve) door panel is all hidden inside, this adjustment needs to be adjusted according to different designs.
-
Anonymous users2024-01-23Depending on what kind of hinge it is, generally speaking, hinged hinges are used more. The hinge hinge can be loosened with a screwdriver to loosen the link screws on the hinge, and then slide into the hinge chute to the appropriate position and then stare. If it is 5 mm, the hinge of the monotonous door on one side can be choked, and it is necessary to adjust the door on both sides.
If it is a butterfly hinge, you can only remove the door panel and re-hole it.
-
Anonymous users2024-01-22The left and right adjustment of the cabinet door of panel furniture needs to adjust the hinge balance pure, and the hinged hinge can adjust the screws on the hinge.
The butterfly hinge needs to be re-drilled and installed in the early hole. Turn left|Turn the butterfly hinge to the right and turn left to |The common classification of right-turning hinges is divided into two types: detachable type and fixed type according to the type of base, and is divided into two types according to the type of arm body: slide-in type and card type;
In addition, according to the position of the door panel covering, it is divided into a full cover (straight bend, straight arm) general cover 18 centi, half cover (middle bend, curved arm) cover 9 centi, and the built-in (big bend, big curve) door panel is all hidden inside, this adjustment needs to be adjusted according to different designs.
There are hinges to connect the cabinet body to the door, and the screws on the hinges are used to adjust the gap between the doors.
A 2mm door slit for panel furniture is optimal. 1mm on both sides, 2mm in the middle is best.
If you have children, you can still find a brand locally, and generally the area is about 120 to ensure the quality.
As far as I know, the main product is particleboard, which meets European environmental standards. Formaldehyde emissions are 9 mg per 100 grams for E1 grade and 5 mg per 100 g for EO grade. Based on personal experience, the dew river board is suitable for factory cabinet furniture production. >>>More
My bed was bought in Yantai City Window, there is no taste at all, when buying furniture is also quite contradictory, buy solid wood is generally red sandalwood color, don't like it, pine bar, my husband doesn't like it, and then the pine wood texture is soft, after a long time and cracks, and finally I chose panel furniture, my bed and dining table are white oak that color, my husband and I like it very much,