The upper part of the mobile phone went into the toilet, and after taking it out, I removed the batt

Updated on Toilet 2024-09-19
4 answers
  1. Anonymous users2024-01-24

    Immediately after the phone falls into the water, remove the battery (do not turn it off), dry the phone (the temperature cannot exceed 40 degrees) or dry it without using a hair dryer, the time should be at least 16 hours, and then install the battery and give it a try. If there is still an abnormality, then it can only be sent for repair.

  2. Anonymous users2024-01-23

    Hurry up and take a hair dryer to blow it, wait an hour or two to try it on the start-up

  3. Anonymous users2024-01-22

    Pick it up and take it off, square rice cylinder, and put it for a while instead of using it right away.

  4. Anonymous users2024-01-21

    I had to take it for repairs.

Related questions
1 answers2024-09-19

[After the mobile phone is injected, it is recommended that you do not try to turn it on again, if it is turned on, please turn it off as soon as possible, you can press and hold the power button for more than 10 seconds]. >>>More

1 answers2024-09-19

In this case, the upper part of the toilet drain valve can be removed because there is a clip in the position where the upper and lower parts are combined, and the clip needs to be broken.

4 answers2024-09-19

If you are using a Huawei phone, we recommend that you do the following: >>>More

1 answers2024-09-19

Take it out, don't turn it on, take off the battery, dry the hair dryer with cool air, and then install it and turn it on.

1 answers2024-09-19

Take a hair dryer and blow more handles, just dry the water, or you can dry it.