The gas water heater kitchen does not catch fire

Updated on Kitchen 2024-09-27
4 answers
  1. Anonymous users2024-01-24

    1. Whether the cold water triangle valve is closed, the cold water cannot be passed.

    2. Whether the power switch of the gas water heater is turned on.

    3. Whether there is a beep sound, this depends on the manual.

    4. Whether the water pressure is insufficient, or there is debris blocking the triangle valve.

    5 gas is out (just kidding).

  2. Anonymous users2024-01-23

    Check the hot water line leading to the bathroom and remove the blockage and it will be solved. If it still doesn't work, find a water heater merchant for after-sales service.

  3. Anonymous users2024-01-22

    1. Solenoid valve failure.

    Phenomenon: When ignition, there is only ignition sound, and there is no magnetic sound of solenoid valve "clicking", it may be that the solenoid valve is damaged or aging; If the gas pressure is too high or too low, it will also cause the fire to fail; The solenoid valve has stolen goods, and the gas cannot come out so that it cannot ignite the fire.

    Solution: If the solenoid valve is aged, replace it, replace the gas cylinder with a new one if the gas pressure is a problem, clean it up if the gas valve has stolen goods, and repair the circuit problem if the ignition control circuit.

    2. Failure of water-gas linkage device.

    Phenomenon: No ignition sound or electric sparks.

    Solution: Check that the eardrum in the water-gas linkage valve is aging or damaged, and the micro switch cannot be pushed, then replace the water-gas linkage valve or repair.

    Interior structure (Source: Sina).

    3. The gas type does not match.

    Phenomenon: A little fire, no electric sparks.

    Solution: If the liquefied gas water heater is connected to natural gas, it is necessary to change the liquefied gas water heater to a natural gas water heater before it can be connected and used.

    4. Water pressure problem.

    Phenomenon: A little fire and spark, which ignites and goes out quickly.

    Solution: Turn on the faucet to check if the water pressure is too low, if the water pressure is too low, only stagger the peak water consumption period.

  4. Anonymous users2024-01-21

    Look at whether the battery is still charged or not, and this is generally the reason.

Related questions
5 answers2024-09-27

If the water output in the shower is small, it should be that the shower head is blocked, please unscrew the shower head to try, if it can be played, please replace or clean the shower head!

3 answers2024-09-27

Check the bathroom water pressure or water pipes first, this situation may be far away from the bathroom, the water pressure caused by the fire is not ignited. If the water pressure in the kitchen is higher than that in the bathroom, and it is close to it, it is easy to hit. >>>More

2 answers2024-09-27

The reasons may be as follows: 1. Battery problem - if you use a battery, you should first see if the battery is too old, and the water heater will not catch fire if the voltage is not enough. >>>More

2 answers2024-09-27

The reasons may be as follows: 1. Battery problem - if you use a battery, you should first see if the battery is too old, and the water heater will not catch fire if the voltage is not enough. >>>More

7 answers2024-09-27

Kitchen water too.

resulting in flow through the water heater. >>>More