How to deal with the leakage at the connection between the floor drain sewer pipe and the main sewer

Updated on Bathroom 2024-09-01
4 answers
  1. Anonymous users2024-01-24

    If you have trouble changing the tube, you can dispose of the garbage and glue on the surface of the joint, stop the water and wait for drying, brush the joint with a group A and B quick-drying epoxy resin, and then wrap a layer with glass fiber or a breathable thin cloth, and then coat the glass fiber with epoxy resin. These processes are done continuously, without stopping. This remedy is almost the same as removing the pipe and starting from scratch, but it will be more ugly.

  2. Anonymous users2024-01-23

    If the ground seepage is serious, then only smash open and redo waterproofing, if you can see and not serious, then the advice upstairs is also good, but the fiberglass cloth is not easy to find.

  3. Anonymous users2024-01-22

    Wipe off the water droplets and wrap them evenly a few times with good quality PVC tape. If you can keep the water off for about two hours. If the pipe is made of PC material, it is recommended to use a good PVC such as Liansu to evenly apply the water glue several times.

    Apply once and then apply again after it has dried a little. Not too much at a time. You can solve the problem once and for all.

    If you can wait for a long time, glass sealant is the best choice, but this should be stopped for at least a day. Quick-drying glass glue is also required. I hope my answer solves your problem.

  4. Anonymous users2024-01-21

    Glass silk cloth brush waterproof material.

Related questions
Toilet drain drain drain pipe is lower than the ground, how to remedy
3 answers2024-09-01

The small pipe is connected to the big pipe, and the big pipe is connected to the small pipe, just connect it with glue.

Is it feasible to use waterproof materials for the connection between the floor drain and the sewer
1 answers2024-09-01

No, it is still necessary to connect a section of the pipeline to choose the Jindel floor drain Jindel floor drain panel water flow area of more than 2800 square millimeters, coupled with the unique siphon function, to ensure that the drainage volume can reach up to 80L min under normal conditions, which is much greater than the municipal tap water pressure, 6 points of pipe burst flow. The height of the water seal reaches the national requirement of 5cm, and the water storage capacity of the water seal exceeds 300ml, which can ensure that it does not dry up for 30 days.

The bathroom is decorated with floor drain sewer pipes, and the embedded parts are broken, what shou
6 answers2024-09-01

Recently renovated, the first floor sewer pipe embedded parts are broken, you can re-open, re-open the new pipe, replace it.

Can the leakage of the toilet floor drain pipe be replaced by a smaller pipe without changing the pi
3 answers2024-09-01

It will not solve the problem at the root, and it will leak through the gap between the two pipe diameters.

The main floor drain of the toilet is connected to the length of the sewer pipe
4 answers2024-09-01

Don't pick it up.

Do not rush to use, use cement. >>>More