-
Anonymous users2024-01-24Cement is divided into initial setting and final setting, and the initial setting is the loss of fluidity and plasticity, which is generally not less than one hour; Final setting is the intensity of production, which is generally not less than five hours.
During construction, there is no wet water on the wall, there is dust and too little wet water, the wall is too dry, the temperature is high in summer, the cement and sand lose moisture too quickly, the reaction time is not enough, there is no solidification, and there is too little cement.
balcony closure glue peels off if the wall skin peels off. If it is convenient to hand it over, it is caused by the wall falling off, and if it is not, it is the responsibility of the company.
This is the result of cutting corners, the ratio of cement to sand, the cement is less, it is better to remove the entire wall skin and re-plaster the cement.
There are many options for warmth, but generally they are supported with special cement nails and grids. Therefore, there is no direct effect on the peeling of the exterior wall skin and doing warmth. But it's better to shovel off.
The façade should be a property repair, provided you don't seal the balcony. If it has been sealed and becomes a fully enclosed room, the property will of course not be repaired.