How to fix the leakage of the extra hole in the bathroom

1.Cleaning: Clean the bathroom floor and wall, focusing on the joint between the root of the water pipe and the floor tiles, the perimeter of the floor drain, the combination of toilets, sanitary ware and floor tiles, and the roots of the four walls. This step is very important!

2.Filling: The floor drain, water pipes, sanitary ware, these and floor tiles combined, as well as the surrounding wall roots, the more obvious cracks on the wall and ground, all with cement mortar, or grout re-scraping filling, the requirements should be careful, complete, no omission, batch scraping smooth, dense!

Then let it dry! 3.Brushing: Pour the cover of "Qingquan Toilet Anti-seepage Repair Agent" on the floor of the bathroom, and scrape it evenly from the center to the periphery with a wooden board or scraper, until the entire bathroom floor is scraped, requiring uniform absorption and saturation!

4.Wipe dry: Wait half an hour to 1 hour to dry the excess anti-seepage refiller remaining on the bathroom floor.

5.Maintenance: Do not have open water to rinse and soak within 12 hours after construction, and try to wait until 24 hours later if you want to do a closed water test.