What is the problem that the TOTO toilet can t stop flowing from the overflow pipe to the toilet?

Answer: First, copy.

Check that the flap is properly covered; the second is whether the float is stuck underneath; The third is whether the water stop valve of the float is damaged.

Deal with the above three aspects of DAO accordingly:

1.The flap does not have a lid – adjust the lid manually.

2.The float rests underneath and is manually adjusted to float up.

3.The water stop valve of the float is not only water, but should be replaced in time.

First check the water valve to see if the toilet tank is leaking, whether the triangle valve is leaking, and the water leaking inside the triangle valve is dripping outside the water tank. The problem is likely to be that the water level limit float of the tank is adjusted too high, so that the water level is higher than the overflow, so that the limit effect is lost. There are two kinds of limit floats, the old-fashioned one is very intuitive, you can see it when you open the lid of the water tank, and you can adjust it.

The new type is the water tank cover plate on the water button, its float in the column body that has been standing, can also be adjusted, you can try more, to see if the problem can be eliminated, if not, you can go to the sanitary ware store to ask someone to introduce how to adjust. If it doesn't work, you can ask someone to replace a set of toilet accessories for you.

The water level float is stuck, open the lid of the water tank to see if the float is up, if it is stuck, the activity will be fine, if it is up, adjust the float card down.