-
Anonymous users2024-01-24Can't spray the horns? The general yin angle will be a little thicker, it's the yang angle, you adjust the air pressure of the spray gun a little smaller, the paint switch is also a little smaller, and it will be OK to spray a few times.
You have met the great god, hehe, it is the great god, not the aunt, the bad wrinkling of the spray paint is because 1, the paint is not correct, 2, the air pressure and flow of the spray gun are too high, 3, the distance of the spray gun is too high, the spray gun spraying surface is too small and the flow is too large, 4, the speed of the gun is too slow, resulting in the paint accumulation is too thick, to spray less many times, but also pay attention to the possibility of dry spraying, otherwise the paint surface is grainy and not smooth.
Wash it once a month It's too little to clean after normal use, and pay attention to the gun water (thinner) must be clean. In the past, it was cleaned once a week
1 gas source pipeline has oil and water, 2 refurbished furniture is not treated, there is oil or wax, etc., 3 technical problems,
Falling, hanging pulp?
Sand with fine sandpaper, then clean it before painting the surface. >>>More
It has something to do with the technique, equipment, and paint itself, if it is self-spraying, it will generally appear that you are talking about the situation, the reason is that the distance is not grasped well, and you need to be far away (this depends on your feelings, in short, don't be too far away) to let the paint form a mist attached to the surface of the furniture, and the furniture is best placed flat, so as not to fall due to gravity. Generally, furniture is divided into primer, topcoat, and brightener to achieve the best effect.