-
Anonymous users2024-01-24Dear, the cracked toilet itself is a very dangerous problem. If the crack comes into contact with water, it will continue to extend until the entire toilet bowl cracks. Imagine what would happen if there was a person sitting on the toilet at this time?
If the toilet is under warranty, contact the seller to replace the toilet; If the expiration date has expired, it is recommended to purchase a new one.
-
Anonymous users2024-01-23If you make up, the time will not be long, for the health of the family, do not breed bacteria, easy to clean, it is recommended to buy a new one with good quality to install it,
-
Anonymous users2024-01-22No, please try it with sealant (glass glue)!
Water seeped through the other wall, and the other room was not waterproofed.
The leakage in the bathroom is not caused by the faucet, and the seepage point may be around the mouth of each sewer pipe and around the ground - check the perimeter of the sewer pipe and seal it with structural adhesive; If there is water seepage around the wall under the floor tiles, it is necessary to clean the floor tiles and re-do the waterproofing.
Wall deformationCracking of tiles caused by wall deformation will show regular cracks in transverse, vertical or oblique directions. Precautionary measures: Before laying bricks on the light wall, ask the construction personnel to test the wall to see if the wall is installed firmly; Secondly, it is recommended to make a layer of steel wire mesh on the side of the wall tiles to improve the strength and load-bearing capacity of the wall. >>>More
The reason why there are many cracks on the surface of the bathroom floor after waterproofing is generally the dry shrinkage cracks caused by excessive thickness during construction, especially the corners, pipe mouths and uneven base surfaces, these parts are the key parts of waterproof construction, and the construction personnel often carry out multiple brushing in the case of incomplete surface drying, resulting in excessive thickness of the coating film, and dry shrinkage cracks are caused by the difference in the cold shrinkage coefficient of the thermal barrier, which will lead to water seepage in serious cases. >>>More
High-pressure grouting plugging construction along the roof cracks This needs to find a professional waterproof company in the local area for leakage plugging construction, and high-pressure grouting requires professional equipment for construction (high-pressure grouting machine, water-stopping needle, percussion drill, leak plugging agent, etc.).