-
Anonymous users2024-01-24There are many kinds of toilet screws, some are insert-type screws under the insert nut, and this one needs to be tightened with a Phillips knife.
Some are inflated with the nut embedded in the expansion type, where the screw is fixed first and then inserted into the screw.
Many, many, you can contact me.
There's no way, only to disassemble and reinstall, your toilet called edging, that's it, I'm professional.
Take a torx screwdriver, which is commonly known as a torx screwdriver, and twist it counterclockwise to unscrew it.
The main thing is that it is not easy to start and not easy to focus. If it doesn't work, take it off by sabotage.
If it weren't for the expansion of the rose, you could use a chisel to go straight to the toilet bowl under the toilet and come down on the ground without pulling out the screws. Hit it lightly a few times,
When installing a toilet, it is generally required to install fixing bolts, but as long as the bottom surface of the toilet and the ground are flat, it will not be unstable, so there are also those that do not install bolts. Glue the place where the toilet is in contact with the floor (glass glue is OK), and after installation, seal the gap between the toilet bowl and the floor with glass glue. It can be decided according to the actual situation.