What does solid wood foil flooring mean

In fact, it is veneer.

Texture, the pattern of solid wood veneer is relatively large, because the general solid wood veneer can not be a vertical piece when the piece, that way, the solid wood veneer is very small piece by piece, more according to the position of the annual ring oblique piece, so that the veneer is a piece. Therefore, when veneering, the reverse front pattern of the solid wood board does not match. But the pattern of one face is very natural.

Process: First of all, the surface of the furniture to be pasted with veneer is flattened, and the first white latex is brushed (there is also a special glue for veneer) and the glue is dried, and then brushed for the second time.

Then wait for the glue to be half dry, place the veneer flat on the furniture that has been brushed with glue, (there is a key point here, that is, each sheet should be pressed on top of the previous veneer, that is, as long as the edge of the two veneers is 2 4 cm overlapped) Smooth the veneer by hand, without wrinkles, and then use a sharp blade such as a carpentry knife to cut it with a sharp knife or blade in the middle of the overlapping part of the veneer and the veneer. Remove the excess.

Finally, you need to iron it flat! It is required that there are no pores, no wrinkles, and then sanded it with sandpaper. Edges and corners are the same for the parts with lines, but the difficulty is relatively higher.

The surface is laminated, that is, laminate flooring, which is generally used in rental housing, and the price is relatively affordable, but the life is not long.