How to connect PVC plastic flooring with the bathroom door

Updated on Bathroom 2024-09-28
2 answers
  1. Anonymous users2024-01-24

    No matter what you do in the dry areas of the living room, dining room, bedroom, study, etc.? These wet areas of the kitchen and bathroom must be paved with tiles, the bathroom is a non-slip brick, the door of the bathroom must be used through the door stone, if only the mouth strip is used, unless the sealing is particularly good, otherwise once the water enters, it will definitely soak the wet floor, or cause the ground anti-slip bricks to hollow, serious and even leak downstairs. So my answer is a doorstone.

    If you are asking how to connect the plastic floor with the doorstone, if the quality of the worker's technology and bricks can be reached, then it can be put together directly, there is no need to use the closing strip, if the gap is too large, or uneven. Then you can consider going to the place where you bought plastic flooring to buy a special closure strip.

  2. Anonymous users2024-01-23

    It is recommended that the bathroom should be equipped with a marble threshold (the thick edge is raised by more than one centimeter), and the glue floor connection should be closed with glass glue.

Related questions
4 answers2024-09-28

It can be paved, but do not use ordinary plastic flooring, it is best to use membranes, and the surface should have a concave and convex non-slip texture, and the glue should use two-component waterproof glue, which is more strict on the construction. PVC plastic flooring has incomparable advantages in high-rise buildings for building load-bearing and space saving. At the same time, it also has special advantages in the renovation of old buildings. >>>More

3 answers2024-09-28

It is possible to install a pass.

3 answers2024-09-28

First, copy

In the bathroom we pay attention to the problem of waterproof and anti-slip, and the plastic floor in the actual use of the process is better anti-slip, the whole use of the effect is very good, many people just think that this product in these two aspects to do better, so, for the product or more trust, but also to show that the value of the product is indeed relatively high, can be reasonably used and purchased. >>>More

1 answers2024-09-28

Because the bathroom is often soaked in water, it is generally used with wear-resistant ceramic floor tiles, and the water absorption rate is smaller, which is more economical and convenient to clean. Generally, natural marble floor tiles are used, which are not non-slip. Of course, there are also treated wooden floors that are specially used in humid environments, which are not recommended to be used, but can be used if the ventilation and lighting conditions of the bathroom are good.

1 answers2024-09-28

If you use a door stone, you can make the door stone higher than the bathroom indoor level 3, the door stone is the same as the outdoor level, and then use the door strip to cover the gap between the wooden floor and the door stone.