Have you replaced the plastic toilet ring?

Updated on Toilet 2024-09-08
6 answers
  1. Anonymous users2024-01-24

    1. If the plastic ring of the toilet bowl is damaged, it is generally impossible to replace it separately, and the entire toilet cover needs to be replaced.

    Second, the replacement method of the toilet seat:

    How to change the toilet seat - method 1:

    When replacing the toilet seat, you can replace it by removing the fixing bolt on the back of the toilet bowl and operating in the opposite direction when installing. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.

    How to change the toilet seat - method two:

    Find the screw cap, remove it with a live handler, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

    If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

    How to change the toilet seat - method three:

    Different styles of toilet lid installation are also different, in general, the bottom end of the toilet lid is connected to the position of the toilet, which is screwed up behind it, as long as you reach down to find it, unscrew the screws on both sides to take off the whole cover, very simple.

  2. Anonymous users2024-01-23

    Go to the plumbing accessories store, and the ring is integrated with the toilet seat. Remove it yourself, under the outside of the corresponding fixed position of the toilet seat, touch it with your hand and feel a screw, loosen it The toilet seat can be removed. It's best to buy it as it is, as the toilet is different in size and shape.

  3. Anonymous users2024-01-22

    Yes, measure the size of the widest part of the original toilet in your home and the size of the fixed point of the toilet seat to the front of the toilet, and then go out to buy it and find the one closest to your own size.

  4. Anonymous users2024-01-21

    It can definitely be changed, as long as it is the same size, and you can go to the place where you bought it and replace it with a new one.

  5. Anonymous users2024-01-20

    Normally, there is, but you need to go to the material market to buy it.

  6. Anonymous users2024-01-19

    There are a lot of sized-to-size ones available online.

Related questions
1 answers2024-09-08

However, if the toilet bowl is glued with glass glue, use a wallpaper knife to dissolve the glass glue around the toilet bowl, and it can be removed directly.

2 answers2024-09-08

It is a plumbing accessories store, the ring is integrated with the toilet lid, remove it yourself, under the outside of the corresponding fixed position of the toilet lid, touch a plastic screw with your hand, and loosen the toilet cover to remove it. It's best to buy it as it is, because the toilet is different in size and shape. If you don't care about matching, you can buy the most ordinary one and basically install it.

6 answers2024-09-08

The glue is generally not strong, and the plastic toilet can be glued with a glue stick. >>>More

1 answers2024-09-08

It will be sold in large supermarkets, and if you are too lazy to look for it, there are many of them sold online.

1 answers2024-09-08

No, it won't. The plastic ring generally has the effect of compression and bending, and the plastic itself has excellent toughness.