-
Anonymous users2024-01-24Plates are decks for general decoration. Wool is unprocessed, i.e. the early part of the blank. The blank is the raw material of the floor to be processed, but it still needs to go through the process of measuring the water content and maintaining the health. The specification board is the blank of the floor specification!
-
Anonymous users2024-01-23Solid wood flooring is divided into pure solid wood flooring and multi-layer solid wood flooring!
Multi-layer hardwood flooring is a floor with solid wood veneer on top of the blank! Very stable!
Pure solid wood flooring is made directly from logs, pure natural, and the loss during processing is very large, so the price is relatively high!
The general standard specification is 610*95!
It stands to reason that solid wood flooring should no longer be made, but veneer (laminate) flooring; >>>More
Just discern it, remember to measure the moisture content.
The ground can be made with a layer of anti-over-layer special floor film, and the tape must be glued between them. Lay a layer of blockboard or 5 mile boards, and lay a layer of moisture-proof film. Then lay the solid wood floor must be nailed, (so that the floor has no sound and the foot feels good) you can rest assured.
Imitation solid wood flooring belongs to the category of laminate flooring, which is composed of four parts: high-density board substrate, wood grain decorative paper, aluminium oxide wear-resistant layer on the surface, and moisture-proof balance layer on the back. >>>More
In fact, you don't need to install springs, just install the keel. A moisture-proof film is laid between the keel and the floor, and an insect repellent is placed between the keel. The moisture-proof film interfaces should be stacked 10 cm on top of each other and glued with adhesive tape. The part against the wall foot should be 10 cm higher than the wall foot. >>>More