How to install a solid wood door

Before installation

1. When painting the wall, use non-corrosive and non-melting waterproof materials to cover the wooden door, so as to avoid the paint adhering to the surface of the product, causing peeling and fading, and affecting the overall appearance.

2. Before the installation of the wooden door, it must be placed horizontally on the ground (the stacking height should not exceed 1 meter), and do not lean to avoid deformation.

3. Try to avoid outdoor sunlight for a long time to prevent the wooden door from being heated.

4. Place it in the drying room, and keep the indoor air circulation to prevent the wooden door from getting wet.

5. Prevent the wooden door from being hit abnormally or in contact with corrosive substances.

6. Before installation, the door opening must be treated with the necessary moisture-proof and anti-corrosion.

After installation

1. Under normal circumstances, the door leaf should be closed.

2. The door body should avoid direct sunlight or exposure to sunlight for a long time.

3. When carrying things, pay attention to avoid sharp objects hitting the door body, so as not to scratch the surface.

4. If the humidity and temperature difference between the environment on both sides of the door body is large, the door leaf should be kept open to avoid the deformation of the door body caused by uneven humidity and temperature on both sides.

5. When the wooden door is in use, do not hang heavy objects and step on the door.

6. When opening the door lock and turning the handle, please do not use too much force, so as not to reduce the service life of the lock due to improper use.

7. In the process of use, if the hinge, door lock, etc. are loose, they should be tightened immediately. When the hinge makes a sound when it is opened and closed, it is oiled.

8. After measuring the water on the door, wipe it with a dry cloth immediately.

9. When there are stains on the façade, wipe it with a soft cloth. The use of professional wood product maintenance fluid can extend the service life of wooden doors.

First, fix one side of the door cover, put the door leaf in to leave a gap, and then fix the other side of the door cover, install the top plate, the door leaf, beat the styrofoam, and finally install the line.

Many home decoration in daily life will deal with the phenomenon of buying solid wood doors, so, how to install solid wood doors? What are the maintenance tips for solid wood doors? We've got you covered.

How to install a solid wood door

1. The joint of the door sleeve installation should be tight, leveled, and without white seams; Fixed parts should be clamped; The diagonal of the door sleeve should be accurate, the content tolerance of 2 meters is 1mm, and about 2 meters is allowed.

2. After the door set is on, it should be three-dimensional vertical, with a permissible tolerance of +2mm for vertical angle and +1mm for the flatness of the horizontal surface; There should be fixed screws between the door sleeve and the wall (no less than 3 per meter); The total width of the door sleeve is above 200mm, and the fixed copper sheet should be modified; The gap between the door sleeve and the wall is sealed on both sides with foam glue, and the foam glue should be coated and wiped evenly, and it should be dry and laser cut and leveled.

3. The assembly of the sleeve should be evenly dispensed with the door sleeve and the wall surface fixed, and the connection of the sleeve should be leveled, tight and seamless, and the sleeve line in the same direction should be installed in a Menghui plan; Because the wall is not ordinary, make sure that the socket is leveled. The allowable tolerance of the arc of the sleeve is 1mm. The gap between the sleeve and the wall is solved by sealing the joint.

4. When the door leaf is installed, it should be leveled and verticalized, and the door leaf should be flush with the outer surface of the door cover; The door opens as loudly, and the power switch is flexible.

5. The gap between the door sleeve and the door leaf, the lower seam is 6mm, and the other three sides are 2mm; Allowable tolerance+ for all gaps.

6. When the door is closed tightly, it is closely integrated with the sealing strip and does not shake.

Solid wood door maintenance tips

1. The best way is to use a more professional daily maintenance agent with plant essence for a long time to achieve maintenance, which can lock the moisture. It is also the preferred method for high-end solid wood doors.

2. It is also a very good way to polish and wax the solid wood hallway, which is bright and has a cushioning effect, which can be regarded as killing two birds with one stone.

3. When scrubbing the solid wood door, you find that the stains on the top are too heavy, and there is no ready-made protective agent on hand, which can be temporarily replaced with whitening toothpaste.

4. When the power switch is made on and off the solid wood door, it must be noted that the force should not be excessive, and obvious vibration is the most fatal damage to the solid wood door.

5. Do not use general household cleaners (such as soap powder, detergent, etc.) to scrub the wooden door, this chemical raw material is equivalent to highly toxic for the solid wood door.

6. Do not use small hands or cloths containing oil stains to caress the solid wood door, which will plug the ventilation port of the solid wood door, and it seems to lock the moisture inside, but the oil stains will seep in, which will cause the water to be squeezed out.