Panel furniture three in one connector , who knows where there are high quality manufacturers?

I don't know if you cut the hole yourself or if you drill it yourself, but if you install it, you'll have the hole in it, but if you drill it yourself, the distance of 10 is 9 (18 thickness) and the distance of 15 is 32 (to the center of 15).

It's not a question of whether it's good or not, the two-in-one is suitable for the connection of the 12 centi-plate, the three-in-one is suitable for the connection of the board above 15 centi, the force should be the strong point of the three-in-one, and the two-in-one is generally used for the connection of drawers and backplates!!

Like Chengfei Hardware, Andes, and Taifeng Hardware are all more professional in making three-in-one connectors for panel furniture in China, you can learn about them!

Lesfu, Andes, Unicom, etc., can all go to find out.

Three-in-one is divided into eccentric parts, screws, nuts, installation, first knock the nut (generally white) into the hole position of 10 or 8, and then the screw is twisted into the nut with an electric batch or cross knife, and finally the screw is stuck into the eccentric part, rotate the eccentric part, lock the screw, and assemble. The three-in-one is a link between the boards, so it is recommended to use raw materials for products produced with raw materials, and you can pay attention to the products of Luxf.