-
Anonymous users2024-01-24There is no 'tectonic layer' here;The white toothed member on the right is the structural column, which is located in the wall, and the horsetooth chariot, tie the longitudinal bar and stirrup are left when the wall is built, and the concrete is poured after the formwork is supported. The title of this sentence does not conform to the construction procedures and cannot express what it means!
It is a cantilever balcony, and the structural column of its outer corner is a small column such as railing, railing, etc., only to the top of the railing, and should not be connected with the end of the upper layer of the beam, otherwise the elastic bearing is formed under the end of the upper beam, which makes the stress mode of the upper beam change, and the calculation model is not allowed, the bottom of the beam is changed from compression to tension, and the beam becomes semi-simply supported, and the bottom is not configured with stressed steel bars, and it must be cracked!
The lower part of the beam should not be filled, and the planting reinforcement can also be used, but it should be made into a cross bar, and the concrete on the upper part of the column should be left blank and filled with elastic material.
According to the floor area calculation specification, as long as it is a balcony, only half of the floor area is calculated. Air conditioning panels are not counted as floor area.
There is no problem with the cantilever plate of the meter, and there is no provision in the specification that the cantilever plate of the meter is not done. >>>More
The structural arrangement of the balcony includes wall-mounting, beam-lifting and slab-lifting. >>>More