-
Anonymous users2024-01-24(1) The wall tiles have not been soaked in water and pasted directly;
2) The waterproofing agent of the wall cannot be adhered to the cement slurry;
3) The wall is not thoroughly watered before the wall tiles are pasted;
4) The ratio of cement slurry is too dry or too thin.
-
Anonymous users2024-01-23Cause the wall tiles to be hollow and fall off according to the normal situation analysis: 1The cement mortar mix ratio is unreasonable 2
When pasting, it was not full of ash, and it was not full of paving 3The wall was not cleaned before pasting, and there may be unclean factors such as oil stains 4The tile paste was not moistened with water before, causing the tile to absorb the moisture in the mortar and affecting the strength of the mortar.
If you want to re-paste, first remove the falling off and hollow tiles, clean up the wall, if necessary, you can use a chisel to chisel hair, control the cement mortar mix ratio, and tell the worker to say that the dust is full of empty drums, and the tiles are soaked in water before pasting.
-
Anonymous users2024-01-22The proportion of cement mortar is not well controlled.
The bathroom uses more water and is more humid, and it is also the place where the tiles fall off the most. There are many reasons why bathroom tiles can fall offHow to prevent bathroom tiles from falling off
1. The ground is paved when the bathroom tiles are paved >>>More
The possible causes are as follows:
1. Back to Nantian, it's too humid. When the weather turns dry, it's OK. >>>More
There are many reasons why the bathroom tiles fall off, for example, it is related to the material, and for example, it is also related to the wall. We need to do specific analysis according to the specific situation to solve different problems. >>>More
First, the quality of cement is not good, and second, the wall is waterproofed, but the brick base treatment is not done. >>>More
If the indoor temperature is okay in winter, it won't make much of a difference.