-
Anonymous users2024-01-24The toilet flush button is pressed down and there is no response, there is water in the water tank, and there is no response when the lid is opened, because the toilet outlet valve is damaged, and replacing the toilet outlet valve can solve this problem, the specific operation steps are as follows:
1. Find the toilet outlet valve.
2. Pinch the outlet valve of the toilet bowl and shake it from side to side.
3. You can remove the outlet valve of the toilet.
4. Unscrew the fixing screws of the base.
5. You can remove the base of the toilet outlet valve.
6. Install the base of the outlet valve of the new toilet.
7. Install the outlet valve of the toilet bowl and plug it directly into it, without screws.
8. The replacement is complete.
-
Anonymous users2024-01-23The toilet button is degummed by the pressurized plastic.
-
Anonymous users2024-01-22The button is broken and needs to be replaced.
2. Pinch the outlet valve of the toilet bowl and shake it from side to side.
3. You can remove the outlet valve of the toilet.
4. Unscrew the fixing screws of the base.
5. You can remove the base of the toilet outlet valve.
6. Install the base of the outlet valve of the new toilet.
7. Install the outlet valve of the toilet bowl and plug it directly into it, without screws.
8. The replacement is complete.
This is because the little paw pressed on the lid is not aimed at the button below, you turn this button around, aim it below, and then lock the lock nut tightly.
Check the main valve for tap water first, and then open the lid of the water tank to check the upper and lower water, it is possible that the drain of the toilet has blocked the foreign object. See if the piston can be plugged, if you can't plug the water tank, it will leak, and if the water tank is not satisfied, the switch will not reach the water. It is also possible that the plug of the plugging tank is broken, or the connection with the button is loose, which will lead to the phenomenon of no water.
Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.
Why does the toilet flush spin, how to solve the problem that the button does not rebound, and the maintenance tips are for everyone.
What do you mean is that after flushing, the water tank is not replenished, which means that there is a problem with the water inlet rod and you have to find a seller to repair it. If the water tank is replenished after flushing, but the water cannot be full, the flush valve is stuck, and the water will go all the way to the toilet, which is also a quality problem, and the seller has to help you repair it for free. (If you artificially get the accessories, then you can't get them free).