-
Anonymous users2024-01-24If the water tank can hold water, then the water level of the inlet float is raised, the water level is higher than the overflow, and the float water level is adjusted down, or the float does not work, and the water sanitary ware is replaced.
-
Anonymous users2024-01-23The float switch is not tight, and it leaks.
There are almost no qualified products of this kind, and large manufacturers of low-end products will not do disorderly competition among small factories, hollowing out hollowing out to reduce costs, and the state has no energy to (default) supervise, and there will be no accidents if there is a leakage.
Buy the same set, then close the water inlet angle valve first, use a wrench to remove the water pipe, loosen the fixing nut of the water tank inlet valve, you can remove the bad valve, and then put the new water inlet valve in, tighten the fixing nut on it, and then install the water inlet hose, open the angle valve to test the leak, if it does not leak then OK.
Photo 1 on the left side is the water valve, now can not control the water level, even if the maintenance may not be able to close tightly, a single water valve to buy a photo, replace the new one,
If the newly installed toilet leaks abnormally, no matter what the reason is, it should be within the scope of the three guarantees, and the merchant should be responsible for repairing and replacing it to normal use, and compensate for part of the loss. However, as a user, you should find out as soon as possible and notify the merchant of the repair in time, and you should also bear a part of the loss. 300 square meters of water and thousands of dollars, negotiate with the merchant, and it is not troublesome enough to prosecute. >>>More
According to your description, I should be that the drain valve cover is not put down, if it will not be disassembled, you try to press the drain valve a few times in a row, so that he should be no problem to fall, the white lever is the top rod of the water inlet sealing valve, after the water inlet water volume will float the pontoon, the water inlet valve will stop the water inlet when the sealing environment is generated.
Hello, this is one of the most common failures of the inlet valve, called the inlet valve more than water. When the water level reaches the highest level, it flows into the toilet from the overflow pipe of the drain valve, which wastes water. >>>More