-
Change the float valve, this accessory must be broken.
-
Just open the lid of the water tank and move the water seal.
1. The float cargo float of the inlet valve is stuck, and the float (float) can be pulled up and down by hand, and it can move up and down smoothly under normal circumstances. >>>More
Hello, make a suggestion, if you don't know how to drum, you can go to the place that sells toilets and ask at that time. In fact, it is very simple, the left side of the picture on the left is for adjustment, as long as you can turn it on and slide the water down, it will not be good. Because it is normal not to get it if you haven't touched it, and the upper button on the toilet tank lid is not good for water, your current problem is that the button of the water tank lid is down, you can solve it by looking at it. >>>More
You mean the full water button doesn't drain? The cable can be adjusted appropriately for observation.
x0d x0a pulls the water drift up with his hands, and looks at Jing Jing to see if there is still water ingress, if not, it means that the position of the water drift is not suitable. At this point, it is enough to lower the water drift position, which can increase the buoyancy to close the inlet valve port. If there is still water inlet after lifting the water bleaching, it is very likely that there is a problem with the components of the automatic water inlet valve, and you have to ask the water master to come to Liangnian to check and repair. >>>More
Take off the lid of the water tank and press it directly with your hand, if it doesn't respond, the plug inside the flushing activity is broken and needs to be replaced.