-
Anonymous users2024-01-24First of all, you should see whether there is leakage in your bathroom, if it is not leaking, you can directly chisel and pave the floor tiles on the bathroom floor, or you can do a layer of elastic waterproof layer on the bathroom floor and then do decorative treatment. If there is leakage, smash it again, redo waterproofing, pave the geothermal heat, press it at the geothermal switch, and then pave the ground decoration after there is no leakage.
It is recommended to remove it and do waterproofing again. Professional construction with plugging treasure to treat the yin and yang angles, pipe root R angles, and then paint polyurethane, closed water test. After no problem, you can apply a protective layer and tile.
The combination of anti-drainage is one of the principles of waterproofing. >>>More
The simple way to find the slope of the ground is mostly to use a soft plastic pipe, fill in some tap water and then use the principle of the connector to find the slope, usually slightly higher around the side, gently inclined to the direction of the floor drain. The professional construction team uses a laser triangulation level measuring instrument. Good luck.
Bathrooms must be waterproofed. To do waterproofing, it is necessary to solve the waterproofing of the ground to prevent water leakage into the substructure, and to solve the waterproofing of the wall to prevent water from leaking to the other side of the same wall. If it is divided into dry and wet areas, the wet area is generally meters, and the dry area is 20-30 cm. >>>More
If you are brushing waterproof coating, you must first ensure that the ground is flat (which is conducive to making a waterproof membrane), and then clean up the floating dust and keep the ground dry. >>>More