-
Anonymous users2024-01-24Are you using a wall-hung boiler? If so, make sure that the hot water valves are open, you can turn on the faucet on the hot water end, see if the wall-hung boiler is started, start not hot, adjust the temperature, wait a minute! If it does not start, it means that the hot water system is not accessible, check the valves and pipelines!
It won't be a big problem, the boiler system is no problem with floor heating first of all, pay attention to checking the pipeline problem!
If there is a circulating pump and forced circulation, it should not affect each other, first turn off the heating on the wall on the ground, or close the return valve a little smaller, check whether the floor heating can be circulated, check whether the supply and return valves of the floor heating are all open, whether there is an exhaust valve in the floor heating part, open the exhaust valve to see if there is air inside, and if there is a dirt remover to see if there is a blockage, this can only be checked one by one, test to find the cause ---
There are many reasons why the floor heating is not hot, such as air in the pipes, the water pressure is too small, the pipeline design is not reasonable, the pipes are uneven, or the pipes are too long? Or maybe the heat source isn't turned on, or the thermostat isn't set up properly? Wait, it is recommended to find an installation company to check (Shure floor heating), if you are central heating, it is recommended that you find a property to repair.
There are many reasons why the floor heating is not hot, such as air in the pipes, the water pressure is too small, the pipeline design is not reasonable, the pipes are uneven, or the pipes are too long? Or maybe the heat source isn't turned on, or the thermostat isn't set up properly? Wait, it is recommended to find an installation company to check (Shure floor heating), if you are central heating, it is recommended that you find a property to repair.
Community renovation and laying underfloor heating. You want to now kitchen and bathroom not laid, but ready for future remodeling. Because both the kitchen and the bathroom need to be heated, this idea doesn't make sense. >>>More
There should be a water distribution tank for floor heating, check whether all the branch valves are open at the water distribution tank, close the water supply valve of the water distribution tank, open the exhaust valve at the top of the water supply distribution tank, empty the air inside, when there is water flowing out with the exhaust valve, open the water supply valve, close the exhaust valve, if the other rooms are not hot, all the valves have been opened, then the already heated space is in the water distribution tank, close the water supply (or return) valve a little smaller, and the other rooms should be hot---