How to install the smart password lock for the anti theft door

The newly bought fingerprint lock has installation drawings and instructions. . .

However, a professional locksmith understands how to install it at a glance

1. The inner and outer panels are not equipped with handles, according to the left and right directions of the door, please install and fix the handles on the inner and outer panels first, please be careful not to install them in reverse.

2. Insert the lock cylinder into the lock body hole, slightly tighten the lock cylinder bolt, and turn the lock cylinder lever, one is to verify that the lock cylinder is installed in place; the second is to verify whether the unlocking status is smooth; After confirming the qualification, fix the lock cylinder bolt and the lock cylinder lever is exposed to a length of 15+-3 mm.

3. Insert the cable plug of the outer lock plate into the socket corresponding to the inner lock plate, and turn on the power switch of the inner lock plate. Set up, test the corresponding function of the door lock, and insert the cutout switch with the square shaft. Insert the outer lock plate wire plug into the socket corresponding to the inner lock plate firmly, and lead it to the position of the outer lock plate of the anti-theft security door through the square shaft inner hole of the anti-theft security door.

4. Insert the square shaft into the square hole of the lock body, align the handle hole, lever hole and fuse hole of the inner lock plate, press the unlocking or locking button, and turn the drag mechanism to make the lever and the lock cylinder fit in place. Install the outer lock plate sleeve nut to the outer lock plate bolt and fix it tightly. Press the lock key of the remote control key to observe whether it is locked, if it is unlocked, please press the button on the inner panel to change the unlocking direction.