-
LZ didn't say what the kitchen lights looked like, whether they were round or square, first check if it was a lamp problem? If it is a lamp problem, buy one according to the above model and install it, if there are other problems, you have to replace it with a new one.
-
Prepare the bulb, turn off the switch, turn on the lampshade, unscrew the bulb, replace it with a new one, close the shade, and turn on the switch. It's lit up... Hehe.
-
Take the original one down and replace it with a new one. If you can't solve it, call for help.
-
Take a flashlight and use it on the roof of the hanging house first.
-
Call a repairman to fix it.
-
Change!! Let's start with candles.
-
Find a property to help repair it.
-
Use flashlights, emergency lights, etc.
-
Call the property.
-
To find out why, it's best to find a light bulb and take a look!
-
Take your phone and shine it first.
-
How did you break it? Will you fix it·· If you can't fix it, let's get a new one
-
Tragedy...
It depends on what kind of lamp, different lamps have different ways to change, divided into categories of incandescent lamps, energy-saving lamps, LED lights, more styles of ceiling lights, embedded integrated ceiling lamps and other various, each change method is different, it is best to paste a picture to help you.
This needs to be checked by a professional, and if it is a lamp with an integrated ceiling, the cover must be opened. If the light is outside, open the cover and change the lamp tube to try, and if it doesn't light up, the ballast is broken. Also, check whether there is a power supply to the lamp before maintenance, and sometimes the switch will also have problems.
The LED light does not light up, mainly due to two reasons, one is the problem of the light source, and the other is the problem of the power supply. At present, the light source of LED lamps is composed of LED lamp beads, first disconnect the power supply at home, open the lampshade, and measure whether the LED light source is broken with a multimeter (the lamp beads are generally connected in series), if so, then look at the style of the light source, buy the same light source and replace it, pay attention to the voltage range of the light source when buying, and buy the light source of the same voltage. If the light source is detected with a multimeter, it depends on whether it is a problem with the power supply, the general LED ceiling lamp is the method of using an external power supply, then you can directly buy a power supply to replace it, some LED light manufacturers use a bad power supply, and the power supply is the most likely to have a problem.
How to deal with the broken lights of the integrated ceiling: >>>More
How to fix a broken LED light?