What are the particularities of solid wood furniture?

First of all, we should pay attention to the quality of wood. Open the doors and drawers of the furniture cabinet to observe whether the wood is dry and white, and whether the texture is tight and delicate. If furniture made of particleboard, MDF or one-time molding board is used, it is required that there should be no pungent odor after opening the cabinet door or drawer.

For all-solid wood furniture, it is enough to determine the material used in the furniture. So, for non-all-solid wood furniture, what materials are used for each part of the furniture, you must figure it out when buying. Generally, pine and mahogany furniture are mostly solid wood furniture, while teak furniture is mostly local solid wood furniture, such as teak wood is used for the front face, and other wood is used for plywood.

When purchasing, the merchant must write clearly on the contract what kind of wood is used for each part of the same furniture. Among the materials used in solid wood furniture, there are pure solid wood whole boards and direct boards. Pure solid wood whole board is a whole piece of log sawn timber, and the direct board is spliced by some wood scraps It seems to be a production process problem, but it is also very related to the material, especially direct wood.

At present, the direct wood on the market is generally rubberwood. And in many cases, merchants or manufacturers will use rubberwood to pass off as oak. The two materials are very different in terms of material and price.

Rubber wood is generally domestic, while oak is only imported, generally imported from the United States and Australia. The climate of various regions in China has an impact on the moisture content of wood, and the moisture content of wood shall not be higher than 1% of the local equilibrium moisture content in the use area, otherwise, the wood is easy to cause mortise and tenon separation due to large expansion and contraction, furniture falling apart, and warping. Therefore, to buy solid wood furniture produced by enterprises with good drying equipment and drying technology, it is not important to produce solid wood furniture locally or abroad, the key is whether its moisture content is consistent with the equilibrium moisture content of the use area.