The hardwood floors are loud

1.The ground is uneven.

Because the ground is uneven, after the floor is paved, there is a gap between the floor and the ground in individual places, and in the process of people walking, the floor moves up and down, and produces a sound. It is characterized by the fact that after the floor is paved, there is a sound immediately when people move around, and it is local. Measures are taken to measure the flatness of the ground before floor paving, and its flatness should be less than 3mm 2000mm, and the ground that does not have the conditions should be leveled before paving.

2.When the floor is paved, the gap around the perimeter is insufficient.

When the floor is paved, the gap around the perimeter is not enough, resulting in a slight arching of the floor. There is a gap between the floor and the ground, and there is a sound when people move around. Its characteristic is that it does not sound after just paving, after a period of time, a large area sounds, and the wall and the floor have been topped very tightly.

The measure is to leave enough gaps around the floor, especially at the door, wall kitchen, balcony and other areas to leave gaps to ensure that the reserved gaps are even. When the pavement length exceeds 8m, it should be done partition and bridge treatment.

3.The moisture-proof membrane is breathable.

After the floor is paved, because the moisture-proof film joint is not sealed with tape, the moisture-proof film of individual places is broken in the paving process, causes the ground moisture leakage, especially the geothermal environment, the ground is wet, and a large amount of moisture penetrates into the back of the floor, causes uneven expansion, makes the floor deformed, slightly twisted, produces a gap between the floor and the ground, and produces a sound in the process of stepping on. This kind is characterized by the fact that there is no sound after just paving, and after a period of time, a large area of sound is produced, and there may be gaps between the wall and the floor. The measures taken are that before the floor is paved, the joints of the moisture-proof film must be sealed with tape to ensure that they are not breathable.

4.Symmetrical placement of interior furniture (heavy objects).

After the floor is paved, because the furniture and heavier items are symmetrically placed on both sides of the room, the floor is pressed, in the case of humid environment, the floor absorbs moisture and expands, because both sides are pressed by heavy objects, the floor can not move, produces regional bulging. Causes the floor to make a noise in the area. The measure is to place heavy objects on one side as much as possible to ensure that one side of the floor moves freely.

The sound of the floor is sometimes the result of a factor, and sometimes it is the result of a combination of several factors. Therefore, to prevent the noise of the floor after paving, comprehensive measures should be taken, comprehensive prevention.

Before laying the floor, the ground is leveled, the keel is not paved, or the quality of the floor is not good, many reasons are caused, and the floor master's statement is very irresponsible!

It should be that the foundation is not paved, otherwise there will be no such phenomenon, which floor are you using?

That's because the decoration company was lazy and didn't level you, talk to the decoration company and let them re-level. Either the keel is not well laid!

It should be damp, and there really isn't a good way to do this. Wooden floors are most afraid of moisture. Solid wood flooring has high requirements for temperature and humidity, such as summer sunny days are best not to let the wood floor be exposed to the sun for a long time, which may make the paint on the surface of the floor aging and cracking.

And it is also important to note that the temperature change is not too large, which is not good for solid wood flooring. Remember to put a humidifier when turning on the heating in winter to ensure that the floor does not dry out too much and shrink. As a substitute, I think this new type of tile is very good, because its pattern is the same as most solid wood floors, which are relatively high-end wood species, such as rosewood or rosewood, and the stability is much higher than that of wood floors, and it is not afraid of formaldehyde.