One wall of the toilet is made of lightweight bricks, how do you need to do waterproofing, do you ne

Updated on Toilets 2024-09-30
4 answers
  1. Anonymous users2024-01-24

    First scrape and level with rigid waterproof polymer cement waterproof mortar, the construction thickness of waterproof mortar is 3 5 mm, and then brush the elastic waterproof coating, generally choose polymer cement waterproof coating (JS waterproof coating) or acrylic elastic waterproof coating, pay attention to scattering some coarse sand on the coating when brushing the last time, so as to increase the adhesion of the tile in the future.

  2. Anonymous users2024-01-23

    Waterproof coatings are generally not suitable for wall waterproofing.

    The repair, because the waterproof coating has to be done outside to make a layer of concrete protective layer. The protective layer is thin and easy to crack and peel off. It is thick and takes up space, and it costs man-hours and hours.

    CF-2000 high-efficiency composite waterproofing agent (cement-based permeable crystalline type) can be treated on both interior and exterior walls, and can be waterproofed by scraping like putty or plastering like putty on the wall or leakage parts, and scraping 5 mm thick. Moreover, the principle of secondary osmosis crystallization can be used to repair and block the original wall leakage channel. It also does not affect the rest of your interior decoration.

    We have more than 30 years of experience in the construction of waterproof plugging structure reinforcement, and have done a lot of such plugging maintenance projects, specializing in the treatment of various leakage incurable diseases. Provide professional scheme design for concrete waterproof leakage repair, and introduce high-quality plugging materials. Keep you leaking.

  3. Anonymous users2024-01-22

    That depends on what kind of waterproof material you choose, it is recommended to use polyurethane waterproof, cement-based waterproof material, directly roll coat 4 times, paste the tile without holding and falling off.

  4. Anonymous users2024-01-21

    It would be nice not to use steel wire mesh tiles.

Related questions
What is the corner of the living room with a wall tile and a wall cloth?
1 answers2024-09-30

You can use stainless steel metal lines to close the corner, depending on the design of the whole surface, and to see whether the two materials are yang corners or yin corners, or flat spelling, in general, using the third material as a corner is a common closing practice.

One of the walls of the kitchen is made of red bricks and single bricks, and the wall thickness (plu
3 answers2024-09-30

Is this wall built? If it is in the assumption, it is recommended to reinforce it with concrete in the corresponding position; If the wall is not too wide, and there are walls connected to it on both sides, the problem is not too big. On the other hand, if the wall is only connected to one side of the wall, and the workmanship is not in place when the wall is built, it is risky.

Prepare to lay wall tiles on one wall of the kitchen, if you use square tiles with a side length of
3 answers2024-09-30

5*5*324=3*2*x

Then x=1350 blocks. >>>More

In the living room, what can be used in addition to brick glass for a partition wall
2 answers2024-09-30

Make a wine cooler?

The one in front is the shoe cabinet at the door, and the one in the back is the wine cabinet in the kitchen, and the glass on the kitchen side is transparent!! The meaning is similar to this! >>>More

Is it normal for one wall of the high-rise toilet to be hollow and the outside of the wall to be hea
1 answers2024-09-30

Wow, how can this heating facility be installed in such a location, the heating obtained in this way may be a stinky heater, who wants such a stinky heater.