How to solve the problem that the slope of the bathroom is not enough

Raise the cloth pool and bathing room you want to install by 10-20 cm respectively, and install pipes below to lead to the floor drain. If it is a building, the floor slab cannot be moved, if it is a floor or a bungalow, see if the floor can be moved, and you can dig a groove and bury the pipe.

I don't understand what you mean, if it has just been renovated and found that it is a cement floor, you can let the master find a way, if the tiles have been paved, then you can only knock it off and start over.

Answer 1, redo: if the slope is really not enough, and other methods almost do not have a particularly good effect, when the bathroom water is still more serious when taking a bath, then the best way is to redo the ground slope, this is more laborious and costly, you need to break the floor tile to redo the waterproof slope, and then paste the tile.

2. Add a water retaining strip: As the name suggests, the water retaining strip is actually used to retain water, if the bathroom at home is always waterlogged, and you are worried that the water in the bathroom will be poured into the living room, then you can add a water retaining strip to the living room and the bathroom doorstone, which can increase the height of the water retaining strip, and you can also place the bathroom water flow to the living room.

It hurts too much to ask a question to redo.

Can you use transparent waterproofing to increase the slope appropriately?

Destroy part of the protective layer of the floor slab and chisel off some! Rediscover the slope!

Then it's not easy to deal with, and if you want to be perfect, you can only re-lay it.