How to install the bathroom to avoid water accumulation

Connect it with waterproofing. Wall treatment is also important. In the general toilet waterproofing treatment, the wall should also be made about 30 cm high waterproof paint to prevent water from penetrating the wall.

However, if the wall of the bathroom is a non-load-bearing lightweight wall, the entire wall should be coated with waterproof paint. The waterproof experiment must be done. After the construction of the toilet is completed, all the sewer in the toilet is blocked, and a 25 cm high "barrier" is built at the door, and then 20 cm high water is poured into the bathroom.

Before laying the floor, let the floor drain be at the lowest point of the ground, like a funnel with a small slope, so that everyone will flow away quickly.

The ground is as flat as possible so that the floor drain is at the lowest point of the ground.

Bathroom is the highlight of home decoration, the highest technical content, there are many requirements, today we will talk about bathroom drainage problems.

For such an enjoyable thing as bathing, the most unbearable thing is to soak your feet in water during the bath. I feel uncomfortable thinking about it, there is wood?

What is the reason for this?

There are three main reasons why the bath water in the bathroom is still draining slowly when the floor drain itself is not blocked and the main sewer is also unblocked

1. The bathroom drainage slope is unreasonable;

2. The floor drain is not at the lowest level of drainage;

3. The floor drain parts are not fast to water.

When making the waterproofing layer of the bathroom, it is necessary to start considering the drainage slope. We are all, the water flows to a low place, and the bathroom needs to have a slope in the direction of the floor drain to facilitate the discharge of stagnant water, if the slope is not enough, the drainage speed will be slow. Of course, the slope should not be too large, otherwise it will cause people to stand unsteadily.

The floor drain should be at the lowest point in the bathroom, so that the sewage can be drained quickly, whether cleaning the floor or taking a shower.

The quality of the drain itself is also very important, the drain has a large drainage area, and the water will be removed faster. It is recommended to use this floor drain in the bathroom.

In addition, the tightness of the floor drain is also very important, and the good sealing performance can not only isolate odors and pests in the pipes, but also help drain water. Because when the water seal drain drains, negative pressure will be formed, resulting in a siphon effect, and the drainage speed will be accelerated.