Is the lock cylinder of Wang Li anti theft door the same as the lock cylinder of Qunsheng anti theft

Look at what kind of door you are Wang Li, the community is bought in batches, the lock cylinder on the market can be universal, ordinary cheap, if it is a retail door bought by Wang Li store, it is difficult to buy the lock cylinder in the market, and the price is expensive.

Wang Li, change the lock cylinder 180 and upgrade the blade 380It also depends on the lock model of your door.

Now the locks are separated by the lock cylinder, that is, you only need to change the lock cylinder, as for the unlocking is not in place, that is, the lock cylinder is not installed, and the lock cylinder shrapnel is not the right lock cylinder gap! There are screws on the side of the lock to adjust, loosen a little, and then knock it back and forth a little, test the sensitivity with the handle, and then use the key to open it, and then tighten the screw.

At present, the lock cylinder level is B-level and C-level, and the high-end is the fingerprint password.

First of all, remove the panel, remove 2 lock nails on the inner panel of the door lock, remove the upper and lower screws of the inner side panel, remove the inner handle panel, and then remove the lock cap and the outer handle, there is a screw in the middle of the stall of the lock body on the door side, between the deadbolts, take out this lock cylinder, and the lock cylinder can be taken out.