How effective is the invisible waterproofing agent in the bathroom?

There are more than 100 kinds of waterproof materials on the market, and there are only about three or four materials that are really closely related to us. As far as the building materials market (supermarket) is concerned, there are mainly polyurethanes, acrylics, polymers, polymers, cement, mortars.

These four types of waterproof coatings are cement mortar, polymer, acrylic, and polyurethane in terms of waterproof performance.

Mortar waterproof coating is a two-component water-based waterproof mortar composed of organic emulsion material composed of acrylic emulsion and a variety of fillers, with inorganic powder composed of special cement and a variety of fillers, and formulated in a certain proportion. This kind of coating belongs to water-based coatings, non-toxic and harmless, non-polluting, is a real environmentally friendly coating, it can be directly constructed on the surface of concrete and firmly bonded, convenient construction, not limited by the moisture content of the base layer, fast drying, short setting time, 2 hours after the construction can be pasted on the surface of the tile. However, due to the fact that this kind of material is a rigid waterproof coating, it lacks elasticity after film formation, and will affect the waterproof effect with the settlement and dislocation of the building, and is generally suitable for parts with relatively stable structure.

First of all, it is recommended to find the cause of the leakage first, and then solve it according to the cause:

1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it needs to be repaired in time.

repair pipes to solve water leakage problems;

2. If there is no problem with the pipeline, then consider that the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to do the waterproofing again, so as to fundamentally solve the problem.

In particular, if you want to completely solve the problem of water leakage, it is basically impossible not to dismantle the bricks, but there is no effect on plugging the leakage on the surface of the tile, so in order to fundamentally solve the problem of water leakage, it is recommended to choose local brick repair or re-do all waterproofing according to the actual water leakage.