How to install the dresser

1. Clip the cutting part of a connecting plate into the back panel part of the dresser, so that the lower end holes are aligned with the corresponding holes on the back of the dresser, and keep them flat and motionless, and then load the flathead screws into the connecting plate holes, and tighten the flathead screws in the clockwise direction with a "ten" shaped screwdriver, and split them in the counterclockwise direction.

2. Straighten the vanity mirror from the plane, place it on the dressing table close to the connecting plate, gently move it back and forth so that the upper end hole of the connecting plate corresponds to the back hole of the dressing mirror one by one, pay attention to maintaining balance, and be careful that the dressing mirror deviates and slips.

3. Finally, the grub screw is loaded into the upper end hole of the connecting plate, and the grub screw is tightened in the clockwise direction with a figure-ten screwdriver, and the counterclockwise direction is split. When disassembling the product, the grub screws and connecting plate must be disassembled or installed during assembly.

The dresser is what every woman needs to use, so the purchase and installation of the dresser should be particularly careful, so as to ensure the normal use in the later stage. So how to install a dresser, and how to buy a suitable dresser, do you understand? Now let's take a look.

1. How to install the dresser.

1. Snap the two connecting plates into the back of the dresser respectively and lock them with flathead screws; 2. Hold the vanity mirror upright, and correspond to each hole one by one by moving; 3. Insert a flathead screw into the hole and lock it with a Phillips screw; 4. If you want to disassemble the dresser, you need to remove the flathead screws and connecting plate first, and brute force cannot be used.

Second, how to buy the right dresser.

1. Different people have their own dressers, but they don't have to like it personally, they also need to match it with the interior decoration style, otherwise it will give people a feeling of incompatibility. In addition, it is best to brush the dresser with paint to prevent cosmetics from penetrating into the dresser and affecting the overall appearance.

2. The dresser will inevitably be equipped with a mirror, in the process of selection, it is best to choose carefully, it is best to choose the design of the folded surface, when using it daily, you can see every angle of your face more comprehensively, and it will be more convenient to make up, you will not miss any corner, and the usual cleaning is much simpler.

3. The raw materials of most dressers are man-made plates, so it is necessary to pay attention to check the authenticity of the materials and the fineness of the workmanship. First of all, let the merchant provide the quality certificate of the dresser, see the formaldehyde solubility and quality problems contained, and ask the smell of the dresser by the way to see if it is pungent, if the pungent smell is big, you should be cautious.

As for how to install a dresser and how to buy a suitable dresser, this is the first introduction, do you understand? The installation of the dresser is not difficult, but pay attention to every detail to ensure that it can be used normally in the future.

The details are as follows.

Snap the two connecting plates into the back of the dresser and lock them with flathead screws; Hold the vanity mirror upright and move the holes one by one; Insert a flathead screw into the hole and lock it with a Phillips screw; If you want to disassemble the dresser, you need to remove the flathead screws and connecting plate first, and do not use brute force.

The standard size of the dresser is about 1500mm in total height and 700mm to 1200mm in width. From the perspective of learning feng shui in Yishan, the requirements for teasing Jane on the indoor dresser are: the mirror and any clock should not be aligned with any door of your home, including the door, the door, the toilet door, the kitchen door and so on.

Different dressers have different ways of mounting.

For details, please check the manual or ask a sales representative.

Summary. Related information: A dresser is a furniture decoration used for makeup. The term dresser, in modern home, has been widely used by owners, customers, and home designers, and now refers to furniture dressers.

Hello, the dresser is installed like this1Snap the two connecting plates into the back of the dresser and lock them with flathead screws; 2.Hold the vanity mirror upright, and correspond to the holes in each banquet one by one by moving; 3.

Insert a flat-head screw in the hole high mountain, and then lock it with a Phillips screw; 4.If you want to disassemble the dresser, you need to remove the flathead screws and connecting plate first, and do not use brute force.

Hail information of Guanling Town, Xiangluqiao: The dresser refers to the decoration of the sail furniture used for makeup. The term dresser, in modern home, has been widely used by owners, customers, and home designers, and now refers to furniture dressers.