-
The rubber gasket at the joint inside is broken, so try another one.
-
Find a property company in your neighborhood.
If not, it should be an aging hose or a problem.
Buy one yourself, and if you have pliers, you can change it yourself.
Of course, if you don't understand it, it's best to find someone who can repair it.
But I think you should ask for advice and learn more when others are doing it.
It will be much more convenient to master some basic repairs at home, and it is also the joy of life.
Dismantle the toilet bowl and remove the cement from where it was originally installed. Go to the building materials market or buy a flange where you sell hardware and building materials (install a special toilet one, less than 10 yuan, you know it as soon as you say it.) Just use this thing to connect one end to the toilet bowl and the other end to the drain outlet. >>>More
The fault of the control of the white light in the controller on the lamp, and the remaining yellow one is normal, so it is the above phenomenon! >>>More
The reason for the air hammer is that some places below you may be blocked, but the blockage is not bad.
Reasons why the toilet won't drain:
1.Nowadays, a filter will be placed in the toilet tank, and after the filter is used for a long time, it will deteriorate and cause more scale to cause the filter to clog, etc., so it will cause the tap water in the tank to not enter smoothly. >>>More
1. The rubber pad of the drain is broken;
2. The float valve is broken or mediated too high, higher than the overflow port, resulting in continuous water ingress, and then water flows out of the overflow port, which is more likely; >>>More