The house has been poured in situ, but I want to pick out another balcony, what should I do?

1. Knock off the cast-in-place concrete where the balcony needs to be made until the steel bar is exposed.

2. Formwork, weld the main reinforcement of the balcony to the original steel bar with a welding machine.

3. Balcony cast-in-place concrete.

Note: The balcony cast-in-place formwork should be made as a load-bearing beam at the position of the joint.

Are you saying that you want to pick out a balcony du, the first floor can be, the second floor and above is not too easy to do, there are too many people to go out, and the problem of eating heavy cannot be solved.

The design of the rear balcony, the load-bearing form of the rear balcony, the connection between the old and new buildings, and the uneven settlement between the old and new buildings are the first issues that designers should consider. Generally, the new and old buildings should not be directly connected together, and settlement joints should be set between the new and old buildings to solve the problem of uneven settlement. However, the rear balcony project has its unique characteristics, the rear balcony is a small bottom area, but the building height is very high, and it is stable on its own.

The sex is very poor, so it should not be made into an independent structure. If it is designed according to the independent structure, it should be considered according to the frame structure. Due to the poor stability of the rear balcony, the reinforcement and cross-section of the frame structure will be increased, so the project cost is increased, and the construction is also inconvenient. If you analyze it according to another idea, that is, to consider the stability and the original building together, that is, to use the old building to solve the stability problem of the balcony after it, it is a good way. Cause.

It has strong stability for the old building, and will not cause the instability of the whole new and old building due to the addition of balconies at the back. In other words, the old building has enough capacity to bear the instability of the rear balcony. Therefore, it is possible to put old and new buildings.

things are connected together. The problem of uneven settlement is advanced by other technical methods.

The house has been poured in situ, but I want to pick out another balcony, what should I do?

1. Knock off the cast-in-place concrete where you need to make a balcony until the steel bar is exposed. 2. Formwork, weld the main reinforcement of the balcony to the original steel bar with a welding machine. 3. Balcony cast-in-situ mixed soil.

Note: The balcony cast-in-place formwork should be made as a load-bearing beam at the position of the joint. The design of the rear balcony, the load-bearing form of the rear balcony, the connection between the old and new buildings, and the uneven settlement between the old and new buildings are the first issues that designers should consider.

Generally, the new and old buildings should not be directly connected together, and settlement joints should be set between the new and old buildings to solve the problem of uneven settlement. However, the rear balcony project has its unique characteristics, the rear balcony is a very small bottom area, and the building height is very high, its own stability is very poor, so it is not suitable to make an independent structure. If it is designed according to the independent structure, it should be considered according to the frame structure.