The entrance door is a double live handle, and I want to change it to a single live handle, so I rem

Updated on Entrance door 2024-08-02
2 answers
  1. Anonymous users2024-01-24

    1.First, use a Phillips screwdriver to remove the screws that can be seen up and down on the inside side of the door.

    2.Remove the handle of the panel, and if you change the lock cylinder, then remove the two screws of the lock sleeve, and then remove the lock sleeve.

    3.Remove the cylinder fixing screws on the side of the lock body (i.e. the side of the deadbolt) and then remove the cylinder. If the cylinder is tight, you can use a screwdriver to gently tap one end of the cylinder to remove it.

    Sometimes, due to the gravity of the door leaf itself, or the door loose page, the door leaf sinks, and the door is locked or the door is not opened smoothly. At this time, it is often very difficult to open and lock the door with a key. At this time, do not forcibly twist the key, so as not to break the key and increase the trouble.

    Correct solution: You should look at the cause first. If the door leaf sinks due to loose loosening, the loose loose leaf should be fixed tightly with screws.

    If the door frame is deformed or its reasons are irreversible, you can start from the door frame and expand the deadbolt accordingly, so that the door lock can be restored to normal and smooth.

  2. Anonymous users2024-01-23

    1. There are two screws up and down the handle in the door, unscrew it down, take out the square bar in the hand to see a long one, or separate on both sides, it is a long strip to see it short, install the square bar on the inner handle and then install it on the door, the outer handle is not installed, you can measure how much more, saw it parallel to the door, do not protrude, the outside handle can not open the door, but the outside handle is still moving.

    2. Pay attention to the saw square: there is a card on each side of the square, this end can not be sawed down, and the saw square bar is open inside, and there is no way to fix it.

    3, a simple way to find a person to repair the lock to change it, especially remind that there is no need to replace the accessories, at most is to use a square bar, to change the long for the short.

Related questions
Why is it better to keep the lock handle of the security door alive in single or double active?
2 answers2024-08-02

There are usually three types of locks:

The first kind is called Double-Active, that is, both inside and outside can open the lock tongue by pressing down on the hand lock. >>>More

On the choice of single or double active for the security door handle
1 answers2024-08-02

Only install a door, it is best to have a single live handle, and if you forget to lock the door, at least ordinary people can't get in. >>>More

The anti-theft door handle is changed from double to single, after the square steel bar is truncated
6 answers2024-08-02

You can change to active-active. Active-Active security. In fact, the security is at the level of the lock cylinder. It's safe to lock the door. It is very difficult to open with a key, which means that there is a problem with your lock and needs to be repaired, not to change the double life can solve it.

Can the double-active handle of the anti-theft door be changed to a single-live, if not?
2 answers2024-08-02

Theoretically, yes. It is recommended to find a special maintenance master to install and repair it. >>>More

Is the security door with the double-active handle open outside without a key? I don't think some pe
2 answers2024-08-02

If in the city, the entrance door personally likes a single handle, women are alone at home insurance family members can not get in, anti-lock and troublesome, not anti-lock strangers easy to break in.