-
Anonymous users2024-01-24Hisense KFR-72LW cabinet air conditioner fault self-diagnosis function.
Numbering. Timing h temperature Cause of failure.
When flashing, it indicates a system fault indication.
When flashing, it indicates that the room temperature sensor is faulty.
When flashing, it indicates that the indoor coil temperature sensor is faulty.
When flashing, it indicates overheating protection.
When flashing, it indicates freeze protection.
When lit, it indicates a fault indication.
-
Anonymous users2024-01-23It should be a clogged drain pipe or a faulty drain pump.
30 square meters of living room with 2 horsepower air conditioning, the use effect should be good, the outdoor temperature of 35 degrees, not too hot, in line with the conditions for the use of air conditioning, and indoor always maintained at 30 degrees, if there is no problem with the use of settings, it is not normal, it is recommended to find the manufacturer's after-sales service telephone response, anyway, it is a new machine, the rest do not have to care, there is a problem to report for repair in time.
Generally, the condensate outlet of the cabinet machine is about 30CM above the ground. And the drainage must be lower than this 30cm, it is obvious that the cabinet does not have a lifting pump and cannot pump water, which means that your water will flow backwards and become blocked. >>>More
The cooling capacity of about 7KW is a three-horse air conditioner, and the one about is a large three-horse air conditioner. >>>More
Now it seems that there are a lot of them, just look at it on the Internet, I know that there are Fujitsu 3 HP cooling and heating DC inverter hang-up air conditioner ASQG24LFCA, 24LCC or something, but it's quite expensive.
Connect the communication wires of the wire controller one by one, and wrap insulating tape around each one. >>>More