-
Anonymous users2024-01-24My bathroom was converted into a cloakroom by a renovation company. The roof waterproofing is a waterproof paint that is applied in several layers. Once the waterproofing is done, wrap all the pipes into the ceiling for future restroom restoration.
-
Anonymous users2024-01-23Regardless of whether you are a resident or a roof upstairs, the waterproofing there is not under your control after all, so the safest way is to make the ceiling waterproof, and have a certain slope, connect the root canal at the lowest place, and connect it to the sewer, just in case of water leakage above to avoid things being drenched, in addition.
1. Because there is condensate in the water supply and water pipes in summer, it is easy to make the humidity of the storage room larger, wrap the water supply pipes and leave the inspection port for maintenance.
2. Only things can be placed more than 15 cm on the ground to prevent flooding in case the pipe bursts and is blocked.
3. Close the main water valve in this bathroom.
4. Ensure the smooth drainage of the ground and floor drain.
Need to pay attention before renovating:
1. If the walls of the bathroom and the next room are non-load-bearing walls, the layout can be optimized as much as possible. For example, reduce the space of the cloakroom (the cloakroom mainly uses the long side, and the actual utilization rate of the short side is very low) to give the room that is not sufficient, reduce the wall occupation, and the back panel of the cloakroom cabinet can directly add gypsum board to form a partition wall, and reduce the occupation of the partition wall. >>>More
The door of the bathroom can not be facing the bedroom, otherwise the filth will invade and the main disease. >>>More
First, deal with the waterproof problem on the top surface Second, do the best exhaust system for the location of the exhaust outlet, because there are more dark guards now, if you change to the cloakroom, there will be the possibility of moisture, so as an exhaust, and the lamp line is done together, so that when the lights are turned on, you can enter the exhaust treatment, and at the same time do some reverse air blockage, it is best to do it on both the tuyere and the exhaust fan, so that the exhaust may be a little small, but it can also prevent the odor outside. The sewer pipe is best closed with rubber and other items, because we are not sure whether the interior will always be arranged like this, so it is good to properly preserve the originality for future changes, and then it is to make the cabinet according to your requirements.
Cut off the water supply pipe and install a plug, cover and close the drain (if you don't plan to restore it later, you can completely plug it), and then do the decoration.
Cover it with an open wire pipe, because the tile is porcelain white, and the open wire pipe is also white, there is no color difference, the open wire pipe is square, you can choose how big the open wire pipe is according to the number of wires, the open wire pipe can be fixed along the corner of the wall, the general hardware store of the open wire pipe is more, economical and convenient, the method of installing the open wire pipe, use a few points of glue on both sides, and put transparent glass glue between the points, and press the open wire pipe in the position you want to install.