What should I do if the windproof glue leakage in the door crack of the anti theft door?

The windproof adhesive for the door crack of the anti-theft door leaks and replaces the sealing strip glue.

Long-term exposure of > doors to the air may cause wear and tear in addition to dust accumulation, so it is easy to cause the aging of the sealing strip at the junction between the glass and the door frame, thus affecting the windproof effect. In this case, it is recommended to use a screwdriver to clean up the original seal, and then replace it with a new one.

The first is to find a door and window manufacturer and consult whether workers are needed to repair it. If there is a problem with the external glue, contact the worker to operate.

If the glue on the inside of the door and window is not well laid, and the gap is relatively small, you can apply masking tape by yourself. Winter maintenance will encounter the practice of adding wool strips or sealant strips between the window sash and the window frame, which is very undesirable.

The treatment of the leakage of the window sash is the same as the control of the flood, it is necessary to use "sparse", not "blocked", and the use of adhesive strips or wool strips to "block" can only make the deformation of the window sash more serious.

Installation is also an important factor in determining whether doors and windows are sealed, even if there are high-quality doors and windows, the installation is not in place will seriously affect the sealing performance of doors and windows.

First of all, the doors and windows must be safe, otherwise the doors and windows may become more and more crooked after a period of use, and the gap between the window frame and the wall will become larger and larger, and air leakage and air leakage are inevitable. Secondly, when installing doors and windows, styrofoam needs to be used to fill the gap between the window frame and the wall. After the styrofoam is cured, the sealant is evenly applied around the perimeter of the window frame to prevent rainwater from seeping into the room through the installation gaps of the windows and walls, and also to prevent air leakage.

It should be noted that it is necessary to apply glue on both sides inside and outside the window, and some workers try to save trouble and only glue on the inside, or glue at several points inside, which will lead to poor compaction.

Solution: In-depth understanding of installation techniques and supervision of installation workers.

The air leakage of the windproof glue of the anti-theft door wind is generally caused by the aging and hardening of the glue, and the cracks may also be caused by the vibration of the door every time the door is opened and closed. It is recommended that you replace the windproof rubber strip packing, because the durability and toughness of the rubber strip is far greater than that of the windproof rubber. After the rubber strip is stuffed, it can be repaired with windproof glue, which can basically solve the problem.

The air leakage of the windproof glue of the anti-theft door is generally caused by the aging and hardening of the glue, and the cracks may also be caused by the vibration of the door every time the door is opened and closed.

It is recommended to replace the windproof rubber strip packing, because the durability and toughness of the rubber strip are far more than the windproof glue, and the rubber strip is filled and then patched with windproof glue, which can basically solve the problem.

Buy some D-shaped strips on Taobao and stick them on.

Glued to the hardware store for sale.