-
Anonymous users2024-01-24The selection of the fan should first refer to the air volume of the blower in the kitchen, which should be greater than the total air volume of the blower. The influence of 10 meters of pipe length on the smoke exhaust of the fan can not be calculated.
What brand is good, there is no suggestion here, but from the perspective of smoke exhaust efficiency, if the installation site is convenient, you can choose a cabinet fan, this type of fan smoke exhaust efficiency is stronger than that of turbine fan.
-
Anonymous users2024-01-23This mainly depends on your several stoves, the cross-sectional area of the air duct is calculated, and the Guomao fume purifier is recommended, and the engineer will calculate you.
The following can be used for reference: before the installation of the range hood, first, to determine the installation location, and second, to grasp the installation time. >>>More
Precautions for choosing a range hood:
1. There are many factors to consider when purchasing a range hood, generally speaking, the certified range hood has more reliable safety and more guaranteed quality. >>>More
1. The pressure cooker cleaning method boils the cold water in the pressure cooker, and removes the pressure limiting valve when the steam is continuously discharged from the wheel. Turn on the range hood, align the steam water column with the rotating fan blade, and the high hot water steam will continue to rush into the source fan blade and other components, and the oil will flow into the waste oil cup along the road until there is no oil cup in it. 2. Remove the smoke noodle leaves by soaking the dish soap vinegar method, soak them in a basin of warm water mixed with 3 to 5 drops of dish soap and 50 ml of vinegar, soak them for 10-20 minutes, and then scrub them with a clean rag. >>>More
Generally, most of the stoves are about 80 centimeters, and the installation height of the kitchen hood cover of the hotel is generally calculated from the ground, and it can be ten centimeters up and down two meters.
Find the property first and let the property coordinate.