-
Anonymous users2024-01-24The adhesion and flexibility of Orient 911 polyurethane waterproof coating are very good, and it is not easy to get rid of them, so they can only be removed by physical methods.
Cement mortar and ceramic tile professional adhesive should be pasted firmly, and the base layer needs to absorb water, so the waterproof layer is not firmly pasted. >>>More
This bottom will generally have waterproof, will definitely not worry, must do again and wait for the dry after the water to test the water for 24 hours, go downstairs to see if there is water seepage, and then fill in what you said, and lay a layer of waterproof on top.
911 polyurethane waterproof coating is a traditional waterproof material, widely used in roofing, basement, kitchen and bathroom, and is a polymer chemically reactive waterproof coating synthesized with isocyanate as the base material. It is a two-component reaction curing synthetic polymer waterproof coating, component A is a polyurethane prepolymer obtained by polyether and isocyanate through polycondensation reaction, and component B is a color liquid composed of plasticizer, curing agent, thickener, coagulant and filler. >>>More
It is recommended that you choose the latter, ie. After the water and electricity are brushed directly, it is best to brush before the construction starts. Before brushing, all the shaded corners in the bathroom, (especially the pipes and doorways) must be made of cement ash to make a small slope protection of 45 degrees, and then waterproof after the slope protection is dry, and waterproofing must pay attention to the required height of all facades. >>>More
1.Bathroom floor drain waterproof method: base surface (substrate) treatment: >>>More