I have an old house at home, and the bathroom only has a toilet, no sink, and it always smells off

Updated on Bathroom 2024-08-28
3 answers
  1. Anonymous users2024-01-24

    Waterproof: If there are no traces of leakage, then there is no need to redo the waterproofing.

    If you have already bought it, you can install a connected PVC pipe at the toilet and sewer mouth to adjust the position of the water outlet.

  2. Anonymous users2024-01-23

    Check your bend first, if the bend is no longer working, it will definitely be disgusting.

  3. Anonymous users2024-01-22

    It is estimated that the toilet is too old, and there is a crack in the joint where the toilet and the sewer pipe are connected.

Related questions
1 answers2024-08-28

Look at the photo The wall has been tiled, and you can only install multiple power outlets by open wire. However, now electrical and electrical stores generally sell decorative strips that specialize in taking power cords, you can see if there are beautiful and generous, and at the same time calculate the length of the power cord to buy power cords and power sockets. If you use the power cord decorative strip, you can directly buy a single multi-strand wire, and you should buy a square three-core multi-strand wire directly on the bright line, which is white on the outside, the same as the original water heater power cord, which is more beautiful and can be fixed with a line card. >>>More

4 answers2024-08-28

Remove the old faucet, buy a tee, a section of wire, a special faucet for washing machines, and a roll of raw meal belt, and then install the two faucets.

3 answers2024-08-28

Yes, only from where to change. You have to throw away the floor tiles and rebuild them.

7 answers2024-08-28

1. Buy a two-meter-long galvanized flat iron or galvanized steel pipe in the steel market and bury it more than two meters underground outdoors, and then weld the grounding wire (square single-strand copper wire) to the galvanized flat iron or galvanized steel pipe and introduce it indoors to the ground end of the socket, and a self-made home grounding wire is ready. The above is just a theory, in fact, a house with a ground wire is a similar practice, but it is a copper plate buried in the ground. Of course, please consult the electrician for specific operations. >>>More

6 answers2024-08-28

Knock off all the floor tiles, knock off about 20 cm of wall tiles, use waterproof materials to prevent leakage, you can, the only way to cure the root is to try it with the king of plugging, it is estimated that it will not cure the root.